From e30c67483b11bab0ae3795ef7015435489ea7833 Mon Sep 17 00:00:00 2001 From: Peter Son Struschka Date: Sun, 23 Dec 2018 21:05:24 +0700 Subject: reorganization and updates --- basics/.bin/battery-monitor | 41 ++ basics/.config/dunst/dunstrc | 326 +++++++++ basics/.config/kitty/kitty.conf | 783 +++++++++++++++++++++ basics/.config/rofi/config | 2 + basics/.config/rofi/themes/gruvbox | 1 + .../.config/systemd/user/battery-monitor.service | 13 + basics/.config/systemd/user/emacs.service | 13 + basics/.config/systemd/user/ssh-agent.service | 10 + 8 files changed, 1189 insertions(+) create mode 100755 basics/.bin/battery-monitor create mode 100644 basics/.config/dunst/dunstrc create mode 100644 basics/.config/kitty/kitty.conf create mode 100644 basics/.config/rofi/config create mode 160000 basics/.config/rofi/themes/gruvbox create mode 100644 basics/.config/systemd/user/battery-monitor.service create mode 100644 basics/.config/systemd/user/emacs.service create mode 100644 basics/.config/systemd/user/ssh-agent.service (limited to 'basics') diff --git a/basics/.bin/battery-monitor b/basics/.bin/battery-monitor new file mode 100755 index 0000000..ff1ef8b --- /dev/null +++ b/basics/.bin/battery-monitor @@ -0,0 +1,41 @@ +battery_level=`acpi -b | cut -d ' ' -f 4 | grep -o '[0-9]*'` +battery_state=$(acpi | grep 'Battery' | sed 's/Battery\s[0-9]*: //' | sed 's/, [0-9][0-9]*\%.*//') +battery_remaining=$(acpi | grep -oh '[0-9:]* remaining' | sed 's/:\w\w remaining$/ Minutes/' | sed 's/00://' | sed 's/:/h /') + +if [ ! -f "/tmp/.battery" ]; then + echo "$battery_level" > /tmp/.battery + echo "$battery_state" >> /tmp/.battery + exit +fi + +previous_battery_level=$(cat /tmp/.battery | head -n 1) +previous_battery_state=$(cat /tmp/.battery | tail -n 1) +echo "$battery_level" > /tmp/.battery +echo "$battery_state" >> /tmp/.battery + +checkBatteryLevel() { + if [ $battery_state != "Discharging" ] || [ "${battery_level}" == "${previous_battery_level}" ]; then + exit + fi + + if [ $battery_level -le 3 ]; then + sudo systemctl suspend + elif [ $battery_level -le 5 ]; then + notify-send "Low Battery" "Your computer will suspend soon unless plugged into a power outlet." -u critical + elif [ $battery_level -le 10 ]; then + notify-send "Low Battery" "${battery_level}% (${battery_remaining}) of battery remaining." -u normal + fi +} + +checkBatteryStateChange() { + if [ "$battery_state" != "Discharging" ] && [ "$previous_battery_state" == "Discharging" ]; then + notify-send "Charging" "Battery is now plugged in." -u low + fi + + if [ "$battery_state" == "Discharging" ] && [ "$previous_battery_state" != "Discharging" ]; then + notify-send "Power Unplugged" "Your computer has been disconnected from power." -u low + fi +} + +checkBatteryStateChange +checkBatteryLevel \ No newline at end of file diff --git a/basics/.config/dunst/dunstrc b/basics/.config/dunst/dunstrc new file mode 100644 index 0000000..74f0525 --- /dev/null +++ b/basics/.config/dunst/dunstrc @@ -0,0 +1,326 @@ +[global] + ### Display ### + + # Which monitor should the notifications be displayed on. + monitor = 0 + + # Display notification on focused monitor. Possible modes are: + # mouse: follow mouse pointer + # keyboard: follow window with keyboard focus + # none: don't follow anything + # + # "keyboard" needs a window manager that exports the + # _NET_ACTIVE_WINDOW property. + # This should be the case for almost all modern window managers. + # + # If this option is set to mouse or keyboard, the monitor option + # will be ignored. + follow = mouse + + # The geometry of the window: + # [{width}]x{height}[+/-{x}+/-{y}] + # The geometry of the message window. + # The height is measured in number of notifications everything else + # in pixels. If the width is omitted but the height is given + # ("-geometry x2"), the message window expands over the whole screen + # (dmenu-like). If width is 0, the window expands to the longest + # message displayed. A positive x is measured from the left, a + # negative from the right side of the screen. Y is measured from + # the top and down respectively. + # The width can be negative. In this case the actual width is the + # screen width minus the width defined in within the geometry option. + geometry = "300x5-10+80" + + # Show how many messages are currently hidden (because of geometry). + indicate_hidden = yes + + # Shrink window if it's smaller than the width. Will be ignored if + # width is 0. + shrink = no + + # The transparency of the window. Range: [0; 100]. + # This option will only work if a compositing window manager is + # present (e.g. xcompmgr, compiz, etc.). + transparency = 0 + + # The height of the entire notification. If the height is smaller + # than the font height and padding combined, it will be raised + # to the font height and padding. + notification_height = 0 + + # Draw a line of "separator_height" pixel height between two + # notifications. + # Set to 0 to disable. + separator_height = 2 + + # Padding between text and separator. + padding = 8 + + # Horizontal padding. + horizontal_padding = 8 + + # Defines width in pixels of frame around the notification window. + # Set to 0 to disable. + frame_width = 3 + + # Defines color of the frame around the notification window. + frame_color = "#aaaaaa" + + # Define a color for the separator. + # possible values are: + # * auto: dunst tries to find a color fitting to the background; + # * foreground: use the same color as the foreground; + # * frame: use the same color as the frame; + # * anything else will be interpreted as a X color. + separator_color = frame + + # Sort messages by urgency. + sort = yes + + # Don't remove messages, if the user is idle (no mouse or keyboard input) + # for longer than idle_threshold seconds. + # Set to 0 to disable. + # Transient notifications ignore this setting. + idle_threshold = 120 + + ### Text ### + + font = Monospace 8 + + # The spacing between lines. If the height is smaller than the + # font height, it will get raised to the font height. + line_height = 0 + + # Possible values are: + # full: Allow a small subset of html markup in notifications: + # bold + # italic + # strikethrough + # underline + # + # For a complete reference see + # . + # + # strip: This setting is provided for compatibility with some broken + # clients that send markup even though it's not enabled on the + # server. Dunst will try to strip the markup but the parsing is + # simplistic so using this option outside of matching rules for + # specific applications *IS GREATLY DISCOURAGED*. + # + # no: Disable markup parsing, incoming notifications will be treated as + # plain text. Dunst will not advertise that it has the body-markup + # capability if this is set as a global setting. + # + # It's important to note that markup inside the format option will be parsed + # regardless of what this is set to. + markup = full + + # The format of the message. Possible variables are: + # %a appname + # %s summary + # %b body + # %i iconname (including its path) + # %I iconname (without its path) + # %p progress value if set ([ 0%] to [100%]) or nothing + # %n progress value if set without any extra characters + # %% Literal % + # Markup is allowed + format = "%s\n%b" + + # Alignment of message text. + # Possible values are "left", "center" and "right". + alignment = left + + # Show age of message if message is older than show_age_threshold + # seconds. + # Set to -1 to disable. + show_age_threshold = 60 + + # Split notifications into multiple lines if they don't fit into + # geometry. + word_wrap = yes + + # When word_wrap is set to no, specify where to ellipsize long lines. + # Possible values are "start", "middle" and "end". + ellipsize = middle + + # Ignore newlines '\n' in notifications. + ignore_newline = no + + # Merge multiple notifications with the same content + stack_duplicates = true + + # Hide the count of merged notifications with the same content + hide_duplicate_count = false + + # Display indicators for URLs (U) and actions (A). + show_indicators = yes + + ### Icons ### + + # Align icons left/right/off + icon_position = off + + # Scale larger icons down to this size, set to 0 to disable + max_icon_size = 32 + + # Paths to default icons. + icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ + + ### History ### + + # Should a notification popped up from history be sticky or timeout + # as if it would normally do. + sticky_history = yes + + # Maximum amount of notifications kept in history + history_length = 20 + + ### Misc/Advanced ### + + # dmenu path. + dmenu = /usr/bin/dmenu -p dunst: + + # Browser for opening urls in context menu. + browser = /usr/bin/firefox -new-tab + + # Always run rule-defined scripts, even if the notification is suppressed + always_run_script = true + + # Define the title of the windows spawned by dunst + title = Dunst + + # Define the class of the windows spawned by dunst + class = Dunst + + # Print a notification on startup. + # This is mainly for error detection, since dbus (re-)starts dunst + # automatically after a crash. + startup_notification = false + + ### Legacy + + # Use the Xinerama extension instead of RandR for multi-monitor support. + # This setting is provided for compatibility with older nVidia drivers that + # do not support RandR and using it on systems that support RandR is highly + # discouraged. + # + # By enabling this setting dunst will not be able to detect when a monitor + # is connected or disconnected which might break follow mode if the screen + # layout changes. + force_xinerama = false + +# Experimental features that may or may not work correctly. Do not expect them +# to have a consistent behaviour across releases. +[experimental] + # Calculate the dpi to use on a per-monitor basis. + # If this setting is enabled the Xft.dpi value will be ignored and instead + # dunst will attempt to calculate an appropriate dpi value for each monitor + # using the resolution and physical size. This might be useful in setups + # where there are multiple screens with very different dpi values. + per_monitor_dpi = false + +[shortcuts] + + # Shortcuts are specified as [modifier+][modifier+]...key + # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2", + # "mod3" and "mod4" (windows-key). + # Xev might be helpful to find names for keys. + + # Close notification. + close = ctrl+space + + # Close all notifications. + close_all = ctrl+shift+space + + # Redisplay last message(s). + # On the US keyboard layout "grave" is normally above TAB and left + # of "1". Make sure this key actually exists on your keyboard layout, + # e.g. check output of 'xmodmap -pke' + history = ctrl+grave + + # Context menu. + context = ctrl+shift+period + +[urgency_low] + # IMPORTANT: colors have to be defined in quotation marks. + # Otherwise the "#" and following would be interpreted as a comment. + background = "#222222" + foreground = "#888888" + timeout = 10 + # Icon for notifications with low urgency, uncomment to enable + #icon = /path/to/icon + +[urgency_normal] + background = "#285577" + foreground = "#ffffff" + timeout = 10 + # Icon for notifications with normal urgency, uncomment to enable + #icon = /path/to/icon + +[urgency_critical] + background = "#900000" + foreground = "#ffffff" + frame_color = "#ff0000" + timeout = 0 + # Icon for notifications with critical urgency, uncomment to enable + #icon = /path/to/icon + +# Every section that isn't one of the above is interpreted as a rules to +# override settings for certain messages. +# Messages can be matched by "appname", "summary", "body", "icon", "category", +# "msg_urgency" and you can override the "timeout", "urgency", "foreground", +# "background", "new_icon" and "format". +# Shell-like globbing will get expanded. +# +# SCRIPTING +# You can specify a script that gets run when the rule matches by +# setting the "script" option. +# The script will be called as follows: +# script appname summary body icon urgency +# where urgency can be "LOW", "NORMAL" or "CRITICAL". +# +# NOTE: if you don't want a notification to be displayed, set the format +# to "". +# NOTE: It might be helpful to run dunst -print in a terminal in order +# to find fitting options for rules. + +#[espeak] +# summary = "*" +# script = dunst_espeak.sh + +#[script-test] +# summary = "*script*" +# script = dunst_test.sh + +#[ignore] +# # This notification will not be displayed +# summary = "foobar" +# format = "" + +#[history-ignore] +# # This notification will not be saved in history +# summary = "foobar" +# history_ignore = yes + +#[signed_on] +# appname = Pidgin +# summary = "*signed on*" +# urgency = low +# +#[signed_off] +# appname = Pidgin +# summary = *signed off* +# urgency = low +# +#[says] +# appname = Pidgin +# summary = *says* +# urgency = critical +# +#[twitter] +# appname = Pidgin +# summary = *twitter.com* +# urgency = normal +# +# vim: ft=cfg diff --git a/basics/.config/kitty/kitty.conf b/basics/.config/kitty/kitty.conf new file mode 100644 index 0000000..59c52be --- /dev/null +++ b/basics/.config/kitty/kitty.conf @@ -0,0 +1,783 @@ +# vim:fileencoding=utf-8:ft=conf:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + + +font_family Fira Code +bold_font auto +italic_font auto +bold_italic_font auto + +#bold_font Source Code Pro:Bold +#italic_font Source Code Pro:Italic +#bold_italic_font Source Code Pro:Italic:Bold + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. By default they are derived automatically, by the OSes +#: font system. Setting them manually is useful for font families that +#: have many weight variants like Book, Medium, Thick, etc. For +#: example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 15.0 + +#: Font size (in pts) + +adjust_line_height 0 +adjust_column_width 0 + +#: Change the size of each character cell kitty renders. You can use +#: either numbers, which are interpreted as pixels or percentages +#: (number followed by %), which are interpreted as percentages of the +#: unmodified values. You can use negative pixels or percentages less +#: than 100% to reduce sizes (but this might cause rendering +#: artifacts). + +# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols + +#: Map the specified unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each unicode code +#: point is specified in the form U+. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. symbol_map itself can be specified multiple +#: times. Syntax is:: + +#: symbol_map codepoints Font Family Name + +box_drawing_scale 0.001, 1, 1.5, 2 + +#: Change the sizes of the lines used for the box drawing unicode +#: characters These values are in pts. They will be scaled by the +#: monitor DPI to arrive at a pixel value. There must be four values +#: corresponding to thin, normal, thick, and very thick lines. + +#: }}} + +#: Cursor customization {{{ + +cursor #586e75 + +#: Default cursor color + +cursor_shape block + +#: The cursor shape can be one of (block, beam, underline) + +cursor_blink_interval 0.5 +cursor_stop_blinking_after 15.0 + +#: The interval (in seconds) at which to blink the cursor. Set to zero +#: to disable blinking. Note that numbers smaller than repaint_delay +#: will be limited to repaint_delay. Stop blinking cursor after the +#: specified number of seconds of keyboard inactivity. Set to zero to +#: never stop blinking. + +#: }}} + +#: Scrollback {{{ + +scrollback_lines 5000 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. + +scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. + +wheel_scroll_multiplier 5.0 + +#: Modify the amount scrolled by the mouse wheel or touchpad. Use +#: negative numbers to change scroll direction. + +#: }}} + +#: Mouse {{{ + +url_color #0087BD +url_style curly + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, single, double, curly + +open_url_modifiers kitty_mod + +#: The modifier keys to press when clicking with the mouse on URLs to +#: open the URL + +open_url_with default + +#: The program with which to open URLs that are clicked on. The +#: special value default means to use the operating system's default +#: URL handler. + +copy_on_select no + +#: Copy to clipboard on select. With this enabled, simply selecting +#: text with the mouse will cause the text to be copied to clipboard. +#: Useful on platforms such as macOS/Wayland that do not have the +#: concept of primary selections. Note that this is a security risk, +#: as all programs, including websites open in your browser can read +#: the contents of the clipboard. + +rectangle_select_modifiers ctrl+alt + +#: The modifiers to use rectangular selection (i.e. to select text in +#: a rectangular block with the mouse) + +select_by_word_characters :@-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alpha-numeric character in the unicode database will be matched. + +click_interval 0.5 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds) + +mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. + +focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around + +#: }}} + +#: Performance tuning {{{ + +repaint_delay 10 + +#: Delay (in milliseconds) between screen updates. Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS you have to either +#: set sync_to_monitor to no or use a monitor with a high refresh +#: rate. + +input_delay 3 + +#: Delay (in milliseconds) before input from the program running in +#: the terminal is processed. Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) +#: when scrolling. However, it limits the rendering speed to the +#: refresh rate of your monitor. With a very high speed mouse/high +#: keyboard repeat rate, you may notice some slight input latency. If +#: so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +enable_audio_bell yes + +#: Enable/disable the audio bell. Useful in environments that require +#: silence. + +visual_bell_duration 0.0 + +#: Visual bell duration. Flash the screen when a bell occurs for the +#: specified number of seconds. Set to zero to disable. + +window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +bell_on_tab yes + +#: Show a bell symbol on the tab if a bell occurs in one of the +#: windows in the tab and the window is not the currently focused +#: window + +#: }}} + +#: Window layout {{{ + +remember_window_size yes +initial_window_width 640 +initial_window_height 400 + +#: If enabled, the window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +enabled_layouts * + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value * means all layouts. The first listed layout will +#: be used as the startup layout. For a list of available layouts, see +#: the layouts. + +window_resize_step_cells 2 +window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing windows. The cells value is used for horizontal resizing +#: and the lines value for vertical resizing. + +window_border_width 1.0 + +#: The width (in pts) of window borders. Will be rounded to the +#: nearest number of pixels based on screen resolution. Note that +#: borders are displayed only when more than one window is visible. +#: They are meant to separate multiple windows. + +draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: minimum needed borders for inactive windows are drawn. That is only +#: the borders that separate the inactive window from a neighbor. Note +#: that setting a non-zero window margin overrides this and causes all +#: borders to be drawn. + +window_margin_width 0.0 + +#: The window margin (in pts) (blank area outside the border) + +single_window_margin_width -1000.0 + +#: The window margin (in pts) to use when only a single window is +#: visible. Negative values will cause the value of +#: window_margin_width to be used instead. + +window_padding_width 0.0 + +#: The window padding (in pts) (blank area between the text and the +#: window border) + +active_border_color #00ff00 + +#: The color for the border of the active window + +inactive_border_color #cccccc + +#: The color for the border of inactive windows + +bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred + +inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +#: }}} + +#: Tab bar {{{ + +tab_bar_edge top + +#: Which edge to show the tab bar on, top or bottom + +tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts) + +tab_bar_style fade + +#: The tab bar style, can be one of: fade or separator. In the fade +#: style, each tab's edges fade into the background color, in the +#: separator style, tabs are separated by a configurable separator. + +tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +active_tab_foreground #000 +active_tab_background #eee +active_tab_font_style bold-italic +inactive_tab_foreground #444 +inactive_tab_background #999 +inactive_tab_font_style normal + +#: Tab bar colors and styles + +#: }}} + +#: Color scheme {{{ + +foreground #839496 +background #002b36 + + +#: The foreground and background colors + +background_opacity 0.85 +dynamic_background_opacity no + +dim_opacity 0.4 + +#: Solarized +#selection_foreground #93a1a1 +#selection_background #586e75 +# +#color0 #073642 +#color8 #002b36 +# +#color1 #dc322f +#color9 #cb4b16 +# +#color2 #859900 +#color10 #586e75 +# +#color3 #b58900 +#color11 #657b83 +# +#color4 #268bd2 +#color12 #839496 +# +#color5 #d33682 +#color13 #6c71c4 +# +#color6 #2aa198 +#color14 #93a1a1 +# +#color7 #eee8d5 +#color15 #fdf6e3 + +# hard contrast: background = #1d2021 +# background #282828 +# soft contrast: background = #32302f +background #32302f +foreground #ebdbb2 +#foreground_bold = #ebdbb2 + +color0 #282828 +color8 #928374 + +color1 #cc241d +color9 #fb4934 + +color2 #98971a +color10 #b8bb26 + +color3 #d79921 +color11 #fabd2f + +color4 #458588 +color12 #83a598 + +color5 #b16286 +color13 #d3869b + +color6 #689d6a +color14 #8ec07c + +color7 #a89984 +color15 #ebdbb2 + +#: }}} + +#: Advanced {{{ + +shell . + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login to ensure that the shell starts in interactive mode and +#: reads its startup rc files. + +editor . + +#: The console editor to use when editing the kitty config file or +#: similar tasks. A value of . means to use the environment variable +#: EDITOR. Note that this environment variable has to be set not just +#: in your shell startup scripts but system-wide, otherwise kitty will +#: not see it. + +close_on_child_death no + +#: Close the window when the child process (shell) exits. If no (the +#: default), the terminal will remain open when the child exits as +#: long as there are still processes outputting to the terminal (for +#: example disowned or backgrounded processes). If yes, the window +#: will close as soon as the child process exits. Note that setting it +#: to yes means that any background processes still using the terminal +#: can fail silently because their stdout/stderr/stdin no longer work. + +allow_remote_control yes + +#: Allow other programs to control kitty. If you turn this on other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over ssh +#: connections. + +startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session command line option for +#: individual instances. See sessions in the kitty documentation for +#: details. Note that relative paths are interpreted with respect to +#: the kitty config directory. Environment variables in the path are +#: expanded. + +clipboard_control write-clipboard write-primary + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: set of possible actions is: write-clipboard read-clipboard write- +#: primary read-primary The default is to allow writing to the +#: clipboard and primary selection. Note that enabling the read +#: functionality is a security risk as it means that any program, even +#: one running on a remote server via SSH can read your clipboard. + +term xterm-256color + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on Stack Overflow +#: to change it. + +#: }}} + +#: OS specific tweaks {{{ + +macos_titlebar_color system + +#: Change the color of the kitty window's titlebar on macOS. A value +#: of system means to use the default system color, a value of +#: background means to use the background color of the currently +#: active window and finally you can use an arbitrary color, such as +#: #12af59 or red. WARNING: This option works by using a hack, as +#: there is no proper Cocoa API for it. It sets the background color +#: of the entire window and makes the titlebar transparent. As such it +#: is incompatible with background_opacity. If you want to use both, +#: you are probably better off just hiding the titlebar with +#: macos_hide_titlebar. + +macos_hide_titlebar no + +#: Hide the kitty window's title bar on macOS. + +x11_hide_window_decorations yes + +#: Hide the window decorations (title bar and window borders) on X11 +#: and Wayland. Whether this works and exactly what effect it has +#: depends on the window manager, as it is the job of the window +#: manager/compositor to draw window decorations. + +macos_option_as_alt yes + +#: Use the option key as an alt key. With this set to no, kitty will +#: use the macOS native Option+Key = unicode character behavior. This +#: will break any Alt+key keyboard shortcuts in your terminal +#: programs, but you can use the macOS unicode input technique. + +macos_hide_from_tasks no + +#: Hide the kitty window from running tasks (Option+Tab) on macOS. + +macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed. By +#: default, kitty will stay running, even with no open windows, as is +#: the expected behavior on macOS. + +macos_window_resizable yes + +#: Disable this if you want kitty top-level (OS) windows to not be +#: resizable on macOS. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: For a list of key names, see: GLFW keys +#: . The name to use +#: is the part after the GLFW_KEY_ prefix. For a list of modifier +#: names, see: GLFW mods +#: + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you should only use an XKB key +#: name for keys that are not present in the list of GLFW keys. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration. + +#: You can combine multiple actions to be triggered by a single +#: shortcut, using the syntax below:: + +#: map key combine action1 action2 action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: this will create a new window and switch to the next available +#: layout + +#: You can use multi-key shortcuts using the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +kitty_mod ctrl+shift + +#: The value of kitty_mod is used as the modifier for all default +#: shortcuts, you can change it in your kitty.conf to change the +#: modifiers for all the default shortcuts. + +clear_all_shortcuts no + +#: You can have kitty remove all shortcut definition seen up to this +#: point. Useful, for instance, to remove the default shortcuts. + +#: Clipboard {{{ + +map kitty_mod+c copy_to_clipboard +map kitty_mod+v paste_from_clipboard +map kitty_mod+s paste_from_selection +map shift+insert paste_from_selection +map kitty_mod+o pass_selection_to_program + +#: You can also pass the contents of the current selection to any +#: program using pass_selection_to_program. By default, the system's +#: open program is used, but you can specify your own, for example:: + +#: map kitty_mod+o pass_selection_to_program firefox + +#: You can pass the current selection to a terminal program running in +#: a new kitty window, by using the @selection placeholder:: + +#: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +map kitty_mod+up scroll_line_up +map kitty_mod+k scroll_line_up +map kitty_mod+down scroll_line_down +map kitty_mod+j scroll_line_down +map kitty_mod+page_up scroll_page_up +map kitty_mod+page_down scroll_page_down +map kitty_mod+home scroll_home +map kitty_mod+end scroll_end +map kitty_mod+h show_scrollback + +#: You can send the contents of the current screen + history buffer as +#: stdin to an arbitrary program using the placeholders @text (which +#: is the plain text) and @ansi (which includes text styling escape +#: codes). For only the current screen, use @screen or @ansi_screen. +#: For example, the following command opens the scrollback buffer in +#: less in a new window:: + +#: map kitty_mod+y new_window @ansi less +G -R + +#: }}} + +#: Window management {{{ + +map kitty_mod+enter new_window + +#: You can open a new window running an arbitrary program, for +#: example:: + +#: map kitty_mod+y new_window mutt + +#: You can open a new window with the current working directory set to +#: the working directory of the current window using:: + +#: map ctrl+alt+enter new_window_with_cwd + +map kitty_mod+n new_os_window +map kitty_mod+w close_window +map kitty_mod+] next_window +map kitty_mod+[ previous_window +map kitty_mod+f move_window_forward +map kitty_mod+b move_window_backward +map kitty_mod+` move_window_to_top +map kitty_mod+r start_resizing_window +map kitty_mod+1 first_window +map kitty_mod+2 second_window +map kitty_mod+3 third_window +map kitty_mod+4 fourth_window +map kitty_mod+5 fifth_window +map kitty_mod+6 sixth_window +map kitty_mod+7 seventh_window +map kitty_mod+8 eighth_window +map kitty_mod+9 ninth_window +map kitty_mod+0 tenth_window +#: }}} + +#: Tab management {{{ + +map kitty_mod+right next_tab +map kitty_mod+left previous_tab +map kitty_mod+t new_tab +map kitty_mod+q close_tab +map kitty_mod+. move_tab_forward +map kitty_mod+, move_tab_backward +map kitty_mod+alt+t set_tab_title + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and use +#: new_tab_with_cwd. +#: }}} + +#: Layout management {{{ + +map kitty_mod+l next_layout + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty windows at a +#: time or only the current one. + +map kitty_mod+equal change_font_size all +2.0 +map kitty_mod+minus change_font_size all -2.0 +map kitty_mod+backspace change_font_size all 0 + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current window's font size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +map kitty_mod+e kitten hints + +#: Open a currently visible URL using the keyboard. The program used +#: to open the URL is specified in open_url_with. + +map kitty_mod+p>f kitten hints --type path --program - + +#: Select a path/filename and insert it into the terminal. Useful, for +#: instance to run git commands on a filename output from a previous +#: git command. + +map kitty_mod+p>shift+f kitten hints --type path + +#: Select a path/filename and open it with the default open program. + +map kitty_mod+p>l kitten hints --type line --program - + +#: Select a line of text and insert it into the terminal. Use for the +#: output of things like: ls -1 + +map kitty_mod+p>w kitten hints --type word --program - + +#: Select words and insert into terminal. + +map kitty_mod+p>h kitten hints --type hash --program - + +#: Select something that looks like a hash and insert it into the +#: terminal. Useful with git, which uses sha1 hashes to identify +#: commits + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see kittens/hints. +#: }}} + +#: Miscellaneous {{{ + +map kitty_mod+f11 toggle_fullscreen +map kitty_mod+u input_unicode_character +map kitty_mod+f2 edit_config_file +map kitty_mod+escape kitty_shell window + +#: Open the kitty shell in a new window/tab/overlay/os_window to +#: control kitty using commands. + +map kitty_mod+a>m set_background_opacity +0.1 +map kitty_mod+a>l set_background_opacity -0.1 +map kitty_mod+a>1 set_background_opacity 1 +map kitty_mod+a>d set_background_opacity default + +#: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#: client program when pressing specified shortcut keys. For example:: + +#: map ctrl+alt+a send_text all Special text + +#: This will send "Special text" when you press the ctrl+alt+a key +#: combination. The text to be sent is a python string literal so you +#: can use escapes like \x1b to send control codes or \u21fb to send +#: unicode characters (or you can just input the unicode characters +#: directly as UTF-8 text). The first argument to send_text is the +#: keyboard modes in which to activate the shortcut. The possible +#: values are normal or application or kitty or a comma separated +#: combination of them. The special keyword all means all modes. The +#: modes normal and application refer to the DECCKM cursor key mode +#: for terminals, and kitty refers to the special kitty extended +#: keyboard protocol. + +#: Another example, that outputs a word and then moves the cursor to +#: the start of the line (same as pressing the Home key):: + +#: map ctrl+alt+a send_text normal Word\x1b[H +#: map ctrl+alt+a send_text application Word\x1bOH + +#: }}} + +# }}} diff --git a/basics/.config/rofi/config b/basics/.config/rofi/config new file mode 100644 index 0000000..51b43ac --- /dev/null +++ b/basics/.config/rofi/config @@ -0,0 +1,2 @@ +rofi.modi: window,run,ssh,drun +rofi.theme: ~/.config/rofi/themes/gruvbox/gruvbox-dark-soft.rasi \ No newline at end of file diff --git a/basics/.config/rofi/themes/gruvbox b/basics/.config/rofi/themes/gruvbox new file mode 160000 index 0000000..8f3d68d --- /dev/null +++ b/basics/.config/rofi/themes/gruvbox @@ -0,0 +1 @@ +Subproject commit 8f3d68d70ecb19ded014cf5cde53ab9857728f6b diff --git a/basics/.config/systemd/user/battery-monitor.service b/basics/.config/systemd/user/battery-monitor.service new file mode 100644 index 0000000..c672ac5 --- /dev/null +++ b/basics/.config/systemd/user/battery-monitor.service @@ -0,0 +1,13 @@ +[Unit] +Description=Battery Monitor + +[Service] +Type=simple +Environment=DISPLAY=:0 +Environment=XAUTHORITY=%h/.Xauthority +ExecStart=/bin/bash %h/.bin/battery-monitor +Restart=always +RestartSec=10 + +[Install] +WantedBy=default.target diff --git a/basics/.config/systemd/user/emacs.service b/basics/.config/systemd/user/emacs.service new file mode 100644 index 0000000..f3d7df9 --- /dev/null +++ b/basics/.config/systemd/user/emacs.service @@ -0,0 +1,13 @@ +[Unit] +Description=Emacs text editor +Documentation=info:emacs man:emacs(1) https://gnu.org/software/emacs/ + +[Service] +Type=simple +ExecStart=/usr/bin/emacs --fg-daemon +ExecStop=/usr/bin/emacsclient --eval "(kill-emacs)" +Environment=SSH_AUTH_SOCK=%t/keyring/ssh +Restart=on-failure + +[Install] +WantedBy=default.target diff --git a/basics/.config/systemd/user/ssh-agent.service b/basics/.config/systemd/user/ssh-agent.service new file mode 100644 index 0000000..9428410 --- /dev/null +++ b/basics/.config/systemd/user/ssh-agent.service @@ -0,0 +1,10 @@ +[Unit] +Description=SSH key agent + +[Service] +Type=simple +Environment=SSH_AUTH_SOCK=%t/ssh-agent.socket +ExecStart=/usr/bin/ssh-agent -D -a $SSH_AUTH_SOCK + +[Install] +WantedBy=default.target -- cgit v1.2.3