From 1297a2e0ec774a13c9900b63c2b4afbb6582a5d3 Mon Sep 17 00:00:00 2001
From: Peter Son Struschka <me@peter-struschka.com>
Date: Wed, 10 Oct 2018 17:19:29 +0700
Subject: multiple changes mostly to zsh and polybar

---
 spacemacs/.spacemacs.old | 557 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 557 insertions(+)
 create mode 100755 spacemacs/.spacemacs.old

(limited to 'spacemacs/.spacemacs.old')

diff --git a/spacemacs/.spacemacs.old b/spacemacs/.spacemacs.old
new file mode 100755
index 0000000..0c0f627
--- /dev/null
+++ b/spacemacs/.spacemacs.old
@@ -0,0 +1,557 @@
+;; -*- mode: emacs-lisp -*-
+;; This file is loaded by Spacemacs at startup.
+;; It must be stored in your home directory.
+
+(defun dotspacemacs/layers ()
+  "Layer configuration:
+This function should only modify configuration layer settings."
+  (setq-default
+   ;; Base distribution to use. This is a layer contained in the directory
+   ;; `+distribution'. For now available distributions are `spacemacs-base'
+   ;; or `spacemacs'. (default 'spacemacs)
+   dotspacemacs-distribution 'spacemacs
+
+   ;; Lazy installation of layers (i.e. layers are installed only when a file
+   ;; with a supported type is opened). Possible values are `all', `unused'
+   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
+   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
+   ;; lazy install any layer that support lazy installation even the layers
+   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
+   ;; installation feature and you have to explicitly list a layer in the
+   ;; variable `dotspacemacs-configuration-layers' to install it.
+   ;; (default 'unused)
+   dotspacemacs-enable-lazy-installation 'unused
+
+   ;; If non-nil then Spacemacs will ask for confirmation before installing
+   ;; a layer lazily. (default t)
+   dotspacemacs-ask-for-lazy-installation t
+
+   ;; If non-nil layers with lazy install support are lazy installed.
+   ;; List of additional paths where to look for configuration layers.
+   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
+   dotspacemacs-configuration-layer-path '()
+
+   ;; List of configuration layers to load.
+   dotspacemacs-configuration-layers
+   '(vimscript
+     ;; checkers
+     syntax-checking
+
+     ;; completion
+     helm
+     (auto-completion :variables
+                      auto-completion-return-key-behavior 'complete
+                      auto-completion-tab-key-behavior 'cycle
+                      auto-completion-complete-with-key-sequence nil
+                      auto-completion-complete-with-key-sequence-delay 0.1
+                      auto-completion-private-snippets-directory nil
+                      auto-completion-enable-snippets-in-popup t
+                      auto-completion-enable-help-tooltip 'manual)
+
+     ;; emacs
+     better-defaults
+     ibuffer
+     org
+     semantic
+     typography
+     ;; filetree
+     neotree
+     ;; fonts
+     unicode-fonts
+     ;; frameworks
+     react
+     ;; fun
+     games
+     ;; international support
+     ;(keyboard-layout :variables kl-layout 'dvp)
+     ;; programming and markup languages
+     (c-c++ :variables
+            c-c++-default-mode-for-headers 'c++-mode
+            c-c++-enable-clang-support t)
+            ;c-c++-enable-rtags-support t)
+     emacs-lisp
+     html
+     java
+     javascript
+     (latex :variables
+            latex-build-command "LaTeX"
+            latex-enable-auto-fill t
+            latex-enable-folding t
+            latex-enable-magic t)
+     markdown
+     python
+     rust
+     (scala :variables
+            scala-enable-eldoc t
+            scala-auto-insert-asterisk-in-comments t
+            scala-use-unicode-arrows t)
+     yaml
+     ;; source control
+     git
+     github
+     version-control
+     ;; spacemacs distribution
+
+     ;; tags
+     ;cscope
+     ;gtags
+     ;; themes
+     colors
+     themes-megapack
+     theming
+     ;; tools
+     (cmake :variables cmake-enable-cmake-ide-support t)
+     docker
+     fasd
+     imenu-list
+     node
+     pdf-tools
+     (shell :variables
+            shell-default-height 30
+            shell-default-position 'bottom)
+     ;ycmd
+     ;; vim
+     evil-commentary
+     evil-snipe
+     )
+
+   ;; List of additional packages that will be installed without being
+   ;; wrapped in a layer. If you need some configuration for these
+   ;; packages, then consider creating a layer. You can also put the
+   ;; configuration in `dotspacemacs/user-config'.
+   ;; To use a local version of a package, use the `:location' property:
+   ;; '(your-package :location "~/path/to/your-package/")
+   ;; Also include the dependencies as they will not be resolved automatically.
+   dotspacemacs-additional-packages '()
+
+   ;; A list of packages that cannot be updated.
+   dotspacemacs-frozen-packages '()
+
+   ;; A list of packages that will not be installed and loaded.
+   dotspacemacs-excluded-packages '()
+
+   ;; Defines the behaviour of Spacemacs when installing packages.
+   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
+   ;; `used-only' installs only explicitly used packages and deletes any unused
+   ;; packages as well as their unused dependencies. `used-but-keep-unused'
+   ;; installs only the used packages but won't delete unused ones. `all'
+   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
+   ;; (default is `used-only')
+   dotspacemacs-install-packages 'used-only))
+
+(defun dotspacemacs/init ()
+  "Initialization:
+This function is called at the very beginning of Spacemacs startup,
+before layer configuration.
+It should only modify the values of Spacemacs settings."
+  ;; This setq-default sexp is an exhaustive list of all the supported
+  ;; spacemacs settings.
+  (setq-default
+   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
+   ;; possible. Set it to nil if you have no way to use HTTPS in your
+   ;; environment, otherwise it is strongly recommended to let it set to t.
+   ;; This variable has no effect if Emacs is launched with the parameter
+   ;; `--insecure' which forces the value of this variable to nil.
+   ;; (default t)
+   dotspacemacs-elpa-https t
+
+   ;; Maximum allowed time in seconds to contact an ELPA repository.
+   ;; (default 5)
+   dotspacemacs-elpa-timeout 5
+
+   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
+   ;; This is an advanced option and should not be changed unless you suspect
+   ;; performance issues due to garbage collection operations.
+   ;; (default '(100000000 0.1))
+   dotspacemacs-gc-cons '(100000000 0.1)
+
+   ;; If non-nil then Spacelpa repository is the primary source to install
+   ;; a locked version of packages. If nil then Spacemacs will install the
+   ;; latest version of packages from MELPA. (default nil)
+   dotspacemacs-use-spacelpa nil
+
+   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
+   ;; (default nil)
+   dotspacemacs-verify-spacelpa-archives nil
+
+   ;; If non-nil then spacemacs will check for updates at startup
+   ;; when the current branch is not `develop'. Note that checking for
+   ;; new versions works via git commands, thus it calls GitHub services
+   ;; whenever you start Emacs. (default nil)
+   dotspacemacs-check-for-update nil
+
+   ;; If non-nil, a form that evaluates to a package directory. For example, to
+   ;; use different package directories for different Emacs versions, set this
+   ;; to `emacs-version'. (default 'emacs-version)
+   dotspacemacs-elpa-subdirectory 'emacs-version
+
+   ;; One of `vim', `emacs' or `hybrid'.
+   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
+   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
+   ;; with `:variables' keyword (similar to layers). Check the editing styles
+   ;; section of the documentation for details on available variables.
+   ;; (default 'vim)
+   dotspacemacs-editing-style 'hybrid
+
+   ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
+   dotspacemacs-verbose-loading nil
+
+   ;; Specify the startup banner. Default value is `official', it displays
+   ;; the official spacemacs logo. An integer value is the index of text
+   ;; banner, `random' chooses a random text banner in `core/banners'
+   ;; directory. A string value must be a path to an image format supported
+   ;; by your Emacs build.
+   ;; If the value is nil then no banner is displayed. (default 'official)
+   dotspacemacs-startup-banner 'official
+
+   ;; List of items to show in startup buffer or an association list of
+   ;; the form `(list-type . list-size)`. If nil then it is disabled.
+   ;; Possible values for list-type are:
+   ;; `recents' `bookmarks' `projects' `agenda' `todos'.
+   ;; List sizes may be nil, in which case
+   ;; `spacemacs-buffer-startup-lists-length' takes effect.
+   dotspacemacs-startup-lists '((recents . 5)
+                                (projects . 7))
+
+   ;; True if the home buffer should respond to resize events. (default t)
+   dotspacemacs-startup-buffer-responsive t
+
+   ;; Default major mode of the scratch buffer (default `text-mode')
+   dotspacemacs-scratch-mode 'text-mode
+
+   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
+   ;; (default nil)
+   dotspacemacs-initial-scratch-message nil
+
+   ;; List of themes, the first of the list is loaded when spacemacs starts.
+   ;; Press `SPC T n' to cycle to the next theme in the list (works great
+   ;; with 2 themes variants, one dark and one light)
+   dotspacemacs-themes '(spacemacs-dark
+                         spacemacs-light)
+
+   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
+   ;; `all-the-icons', `custom', `vim-powerline' and `vanilla'. The first three
+   ;; are spaceline themes. `vanilla' is default Emacs mode-line. `custom' is a
+   ;; user defined themes, refer to the DOCUMENTATION.org for more info on how
+   ;; to create your own spaceline theme. Value can be a symbol or list with\
+   ;; additional properties.
+   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
+   dotspacemacs-mode-line-theme '(all-the-icons :separator arrow :separator-scale 1.5)
+
+   ;; If non-nil the cursor color matches the state color in GUI Emacs.
+   ;; (default t)
+   dotspacemacs-colorize-cursor-according-to-state t
+
+   ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
+   ;; quickly tweak the mode-line size to make separators look not too crappy.
+   dotspacemacs-default-font '("Source Code Pro"
+                               :size 16
+                               :weight normal
+                               :width normal)
+
+   ;; The leader key (default "SPC")
+   dotspacemacs-leader-key "SPC"
+
+   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
+   ;; (default "SPC")
+   dotspacemacs-emacs-command-key "SPC"
+
+   ;; The key used for Vim Ex commands (default ":")
+   dotspacemacs-ex-command-key ":"
+
+   ;; The leader key accessible in `emacs state' and `insert state'
+   ;; (default "M-m")
+   dotspacemacs-emacs-leader-key "M-m"
+
+   ;; Major mode leader key is a shortcut key which is the equivalent of
+   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
+   dotspacemacs-major-mode-leader-key ","
+
+   ;; Major mode leader key accessible in `emacs state' and `insert state'.
+   ;; (default "C-M-m")
+   dotspacemacs-major-mode-emacs-leader-key "C-M-m"
+
+   ;; These variables control whether separate commands are bound in the GUI to
+   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
+   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
+   ;; and TAB or `C-m' and `RET'.
+   ;; In the terminal, these pairs are generally indistinguishable, so this only
+   ;; works in the GUI. (default nil)
+   dotspacemacs-distinguish-gui-tab nil
+
+   ;; If non-nil `Y' is remapped to `y$' in Evil states. (default nil)
+   dotspacemacs-remap-Y-to-y$ nil
+
+   ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
+   ;; there. (default t)
+   dotspacemacs-retain-visual-state-on-shift t
+
+   ;; If non-nil, `J' and `K' move lines up and down when in visual mode.
+   ;; (default nil)
+   dotspacemacs-visual-line-move-text nil
+
+   ;; If non-nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
+   ;; (default nil)
+   dotspacemacs-ex-substitute-global nil
+
+   ;; Name of the default layout (default "Default")
+   dotspacemacs-default-layout-name "Default"
+
+   ;; If non-nil the default layout name is displayed in the mode-line.
+   ;; (default nil)
+   dotspacemacs-display-default-layout nil
+
+   ;; If non-nil then the last auto saved layouts are resumed automatically upon
+   ;; start. (default nil)
+   dotspacemacs-auto-resume-layouts nil
+
+   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
+   ;; effect when using the "jump to layout by number" commands. (default nil)
+   dotspacemacs-auto-generate-layout-names nil
+
+   ;; Size (in MB) above which spacemacs will prompt to open the large file
+   ;; literally to avoid performance issues. Opening a file literally means that
+   ;; no major mode or minor modes are active. (default is 1)
+   dotspacemacs-large-file-size 1
+
+   ;; Location where to auto-save files. Possible values are `original' to
+   ;; auto-save the file in-place, `cache' to auto-save the file to another
+   ;; file stored in the cache directory and `nil' to disable auto-saving.
+   ;; (default 'cache)
+   dotspacemacs-auto-save-file-location 'cache
+
+   ;; Maximum number of rollback slots to keep in the cache. (default 5)
+   dotspacemacs-max-rollback-slots 5
+
+   ;; If non-nil, `helm' will try to minimize the space it uses. (default nil)
+   dotspacemacs-helm-resize nil
+
+   ;; if non-nil, the helm header is hidden when there is only one source.
+   ;; (default nil)
+   dotspacemacs-helm-no-header nil
+
+   ;; define the position to display `helm', options are `bottom', `top',
+   ;; `left', or `right'. (default 'bottom)
+   dotspacemacs-helm-position 'bottom
+
+   ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
+   ;; in all non-asynchronous sources. If set to `source', preserve individual
+   ;; source settings. Else, disable fuzzy matching in all sources.
+   ;; (default 'always)
+   dotspacemacs-helm-use-fuzzy 'always
+
+   ;; If non-nil, the paste transient-state is enabled. While enabled, pressing
+   ;; `p' several times cycles through the elements in the `kill-ring'.
+   ;; (default nil)
+   dotspacemacs-enable-paste-transient-state nil
+
+   ;; Which-key delay in seconds. The which-key buffer is the popup listing
+   ;; the commands bound to the current keystroke sequence. (default 0.4)
+   dotspacemacs-which-key-delay 0.4
+
+   ;; Which-key frame position. Possible values are `right', `bottom' and
+   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
+   ;; right; if there is insufficient space it displays it at the bottom.
+   ;; (default 'bottom)
+   dotspacemacs-which-key-position 'bottom
+
+   ;; Control where `switch-to-buffer' displays the buffer. If nil,
+   ;; `switch-to-buffer' displays the buffer in the current window even if
+   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
+   ;; displays the buffer in a same-purpose window even if the buffer can be
+   ;; displayed in the current window. (default nil)
+   dotspacemacs-switch-to-buffer-prefers-purpose nil
+
+   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
+   ;; may increase the boot time on some systems and emacs builds, set it to
+   ;; nil to boost the loading time. (default t)
+   dotspacemacs-loading-progress-bar t
+
+   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
+   ;; (Emacs 24.4+ only)
+   dotspacemacs-fullscreen-at-startup nil
+
+   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+   ;; Use to disable fullscreen animations in OSX. (default nil)
+   dotspacemacs-fullscreen-use-non-native nil
+
+   ;; If non-nil the frame is maximized when Emacs starts up.
+   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
+   ;; (default nil) (Emacs 24.4+ only)
+   dotspacemacs-maximized-at-startup nil
+
+   ;; A value from the range (0..100), in increasing opacity, which describes
+   ;; the transparency level of a frame when it's active or selected.
+   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+   dotspacemacs-active-transparency 90
+
+   ;; A value from the range (0..100), in increasing opacity, which describes
+   ;; the transparency level of a frame when it's inactive or deselected.
+   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+   dotspacemacs-inactive-transparency 90
+
+   ;; If non-nil show the titles of transient states. (default t)
+   dotspacemacs-show-transient-state-title t
+
+   ;; If non-nil show the color guide hint for transient state keys. (default t)
+   dotspacemacs-show-transient-state-color-guide t
+
+   ;; If non-nil unicode symbols are displayed in the mode line. (default t)
+   ;dotspacemacs-mode-line-unicode-symbols t
+   dotspacemacs-mode-line-unicode-symbols t
+
+   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
+   ;; scrolling overrides the default behavior of Emacs which recenters point
+   ;; when it reaches the top or bottom of the screen. (default t)
+   dotspacemacs-smooth-scrolling t
+
+   ;; Control line numbers activation.
+   ;; If set to `t' or `relative' line numbers are turned on in all `prog-mode' and
+   ;; `text-mode' derivatives. If set to `relative', line numbers are relative.
+   ;; This variable can also be set to a property list for finer control:
+   ;; '(:relative nil
+   ;;   :disabled-for-modes dired-mode
+   ;;                       doc-view-mode
+   ;;                       markdown-mode
+   ;;                       org-mode
+   ;;                       pdf-view-mode
+   ;;                       text-mode
+   ;;   :size-limit-kb 1000)
+   ;; (default nil)
+   dotspacemacs-line-numbers nil
+
+   ;; Code folding method. Possible values are `evil' and `origami'.
+   ;; (default 'evil)
+   dotspacemacs-folding-method 'evil
+
+   ;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
+   ;; (default nil)
+   dotspacemacs-smartparens-strict-mode nil
+
+   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
+   ;; over any automatically added closing parenthesis, bracket, quote, etc…
+   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
+   dotspacemacs-smart-closing-parenthesis nil
+
+   ;; Select a scope to highlight delimiters. Possible values are `any',
+   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
+   ;; emphasis the current one). (default 'all)
+   dotspacemacs-highlight-delimiters 'all
+
+   ;; If non-nil, start an Emacs server if one is not already running.
+   dotspacemacs-enable-server t
+
+   ;; If non-nil, advise quit functions to keep server open when quitting.
+   ;; (default nil)
+   dotspacemacs-persistent-server nil
+
+   ;; List of search tool executable names. Spacemacs uses the first installed
+   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
+   ;; (default '("rg" "ag" "pt" "ack" "grep"))
+   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
+
+   ;; Format specification for setting the frame title.
+   ;; %a - the `abbreviated-file-name', or `buffer-name'
+   ;; %t - `projectile-project-name'
+   ;; %I - `invocation-name'
+   ;; %S - `system-name'
+   ;; %U - contents of $USER
+   ;; %b - buffer name
+   ;; %f - visited file name
+   ;; %F - frame name
+   ;; %s - process status
+   ;; %p - percent of buffer above top of window, or Top, Bot or All
+   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
+   ;; %m - mode name
+   ;; %n - Narrow if appropriate
+   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
+   ;; %Z - like %z, but including the end-of-line format
+   ;; (default "%I@%S")
+   dotspacemacs-frame-title-format "%I@%S"
+
+   ;; Format specification for setting the icon title format
+   ;; (default nil - same as frame-title-format)
+   dotspacemacs-icon-title-format nil
+
+   ;; Delete whitespace while saving buffer. Possible values are `all'
+   ;; to aggressively delete empty line and long sequences of whitespace,
+   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
+   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
+   ;; (default nil)
+   dotspacemacs-whitespace-cleanup 'trailing
+
+   ;; Either nil or a number of seconds. If non-nil zone out after the specified
+   ;; number of seconds. (default nil)
+   dotspacemacs-zone-out-when-idle nil
+
+   ;; Run `spacemacs/prettify-org-buffer' when
+   ;; visiting README.org files of Spacemacs.
+   ;; (default nil)
+   dotspacemacs-pretty-docs t))
+
+(defun dotspacemacs/user-init ()
+  "Initialization for user code:
+This function is called immediately after `dotspacemacs/init', before layer
+configuration.
+It is mostly for variables that should be set before packages are loaded.
+If you are unsure, try setting them in `dotspacemacs/user-config' first."
+  (setq exec-path-from-shell-check-startup-files nil)
+  (setq neo-theme 'icons)
+  (setq ycmd-server-command '("python" "/home/peter/Projects/ycmd/ycmd"))
+  (setq ycmd-force-semantic-completion t)
+  (setq ycmd-startup-timeout 30)
+
+
+  (setq-default
+   js2-basic-offset 2
+   css-indent-offset 2
+   web-mode-markup-indent-offset 2
+   web-mode-css-indent-offset 2
+   web-mode-code-indent-offset 2
+   web-mode-attr-indent-offset 2)
+
+  (push '("melpa-stable" . "stable.melpa.org/packages/") configuration-layer-elpa-archives)
+  (push '(ensime . "melpa-stable") package-pinned-packages)
+  (setq-default flycheck-scalastylerc "/usr/local/etc/scalastyle_config.xml")
+  )
+
+(defun dotspacemacs/user-config ()
+  "Configuration for user code:
+This function is called at the very end of Spacemacs startup, after layer
+configuration.
+Put your configuration code here, except for variables that should be set
+before packages are loaded."
+  (remove-hook 'c++-mode-hook 'ggtags-mode)
+  (remove-hook 'c-mode-hook 'ggtags-mode)
+  (remove-hook 'c++-mode-hook 'cscope-minor-mode)
+  (remove-hook 'c-mode-hook 'cscope-minor-mode)
+  (with-eval-after-load 'web-mode
+    (add-to-list 'web-mode-indentation-params '("lineup-args" . nil))
+    (add-to-list 'web-mode-indentation-params '("lineup-concats" . nil))
+    (add-to-list 'web-mode-indentation-params '("lineup-calls" . nil)))
+  (global-set-key (kbd "<C-tab>") 'ycmd/manual-semantic-company-completer)
+  (add-hook 'c++-mode 'cmake-ide-maybe-start-rdm)
+  )
+
+;; Do not write anything past this comment. This is where Emacs will
+;; auto-generate custom variable definitions.
+(defun dotspacemacs/emacs-custom-settings ()
+  "Emacs custom settings.
+This is an auto-generated function, do not modify its content directly, use
+Emacs customize menu instead.
+This function is called at the very end of Spacemacs initialization."
+(custom-set-variables
+ ;; custom-set-variables was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ '(package-selected-packages
+   (quote
+    (web-mode srefactor pyvenv pipenv org-download meghanada magithub kaolin-themes expand-region evil-magit evil-goggles doom-themes dockerfile-mode docker aggressive-indent counsel ivy smartparens helm helm-core projectile magit rust-mode js2-mode spaceline org-plus-contrib hydra zenburn-theme zen-and-art-theme yasnippet-snippets yapfify yaml-mode xterm-color ws-butler winum white-sand-theme which-key web-beautify volatile-highlights vimrc-mode vi-tilde-fringe uuidgen use-package unicode-fonts unfill underwater-theme ujelly-theme typo typit twilight-theme twilight-bright-theme twilight-anti-bright-theme toxi-theme toml-mode toc-org tao-theme tangotango-theme tango-plus-theme tango-2-theme tagedit tablist symon swiper sunny-day-theme sudoku sublime-themes subatomic256-theme subatomic-theme string-inflection stickyfunc-enhance spaceline-all-the-icons spacegray-theme soothe-theme solarized-theme soft-stone-theme soft-morning-theme soft-charcoal-theme smyx-theme smeargle slim-mode shell-pop seti-theme scss-mode sass-mode rjsx-mode reverse-theme restart-emacs rebecca-theme rainbow-mode rainbow-identifiers rainbow-delimiters railscasts-theme racer pytest pyenv-mode py-isort purple-haze-theme pug-mode professional-theme powerline popwin planet-theme pippel pip-requirements phoenix-dark-pink-theme phoenix-dark-mono-theme persp-mode pcre2el password-generator paradox pacmacs overseer orgit organic-green-theme org-projectile org-present org-pomodoro org-mime org-bullets org-brain open-junk-file omtose-phellack-theme oldlace-theme occidental-theme obsidian-theme noflet noctilux-theme neotree naquadah-theme nameless mwim mvn mustang-theme multi-term move-text monokai-theme monochrome-theme molokai-theme moe-theme mmm-mode minimal-theme maven-test-mode material-theme markdown-toc majapahit-theme magit-svn magit-gitflow magit-gh-pulls magic-latex-buffer madhat2r-theme macrostep lush-theme lorem-ipsum livid-mode live-py-mode link-hint light-soap-theme json-navigator json-mode js2-refactor js-doc jbeans-theme jazz-theme ir-black-theme inkpot-theme indent-guide importmagic impatient-mode ibuffer-projectile hungry-delete hl-todo highlight-parentheses highlight-numbers highlight-indentation heroku-theme hemisu-theme helm-xref helm-themes helm-swoop helm-rtags helm-pydoc helm-purpose helm-projectile helm-mode-manager helm-make helm-gitignore helm-flx helm-descbinds helm-ctest helm-css-scss helm-company helm-c-yasnippet helm-ag hc-zenburn-theme gruvbox-theme gruber-darker-theme groovy-mode groovy-imports grandshell-theme gradle-mode gotham-theme google-translate google-c-style golden-ratio gnuplot gitignore-templates github-search github-clone gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link git-gutter-fringe git-gutter-fringe+ gist ghub+ gh-md gandalf-theme fuzzy font-lock+ flycheck-rust flycheck-rtags flycheck-pos-tip flx-ido flatui-theme flatland-theme fill-column-indicator fasd farmhouse-theme fancy-battery eziam-theme eyebrowse exotica-theme evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-snipe evil-org evil-numbers evil-mc evil-matchit evil-lisp-state evil-lion evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-commentary evil-cleverparens evil-args evil-anzu eval-sexp-fu espresso-theme eshell-z eshell-prompt-extras esh-help ensime emmet-mode elisp-slime-nav editorconfig dumb-jump dracula-theme dotenv-mode docker-tramp django-theme disaster diminish diff-hl define-word darktooth-theme darkokai-theme darkmine-theme darkburn-theme dakrone-theme dactyl-mode cython-mode cyberpunk-theme counsel-projectile company-web company-tern company-statistics company-rtags company-quickhelp company-emacs-eclim company-c-headers company-auctex company-anaconda column-enforce-mode color-theme-sanityinc-tomorrow color-theme-sanityinc-solarized color-identifiers-mode cmake-mode cmake-ide clues-theme clean-aindent-mode clang-format cherry-blossom-theme centered-cursor-mode cargo busybee-theme bubbleberry-theme browse-at-remote birds-of-paradise-plus-theme badwolf-theme auto-yasnippet auto-highlight-symbol auto-compile apropospriate-theme anti-zenburn-theme ample-zen-theme ample-theme alect-themes afternoon-theme ace-window ace-link ace-jump-helm-line ac-ispell 2048-game))))
+(custom-set-faces
+ ;; custom-set-faces was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ )
+)
-- 
cgit v1.2.3